Kit Contents:

1. Cleaning & Decontamination Chemicals:

• MF-97 – Insect Remover (500 ml)
  Quickly and safely dissolves insect residues from paintwork, glass, and plastics.

• MF-75 – Iron Remover (1000 ml)
  Powerful fallout remover for embedded ferrous particles – an essential step for chemical decontamination.

• MF-78 – Water Spot & Mineral Remover (500 ml)
  Effectively eliminates mineral deposits and hard water spots without damaging the paint.

• MF-H0065 – Decaflash (250 ml)
  Final surface prep/degreaser that removes polish residue, waxes, oils, and silicones.

2. Mechanical Decontamination:

• MA-FRA Clay BAR (Blue)
  Soft clay bar for removing deeply bonded contaminants that chemicals alone can't handle.

3. Application Tools:

• PPF Squeegee Set:

  • Soft (70 durometer) – for contoured and delicate surfaces

  • Medium (80 durometer) – all-purpose use

  • Hard (90 durometer) – for flat, firm panels

4. Microfiber Accessories:

• Microfiber Wash Sponge (1 pc)
  Ultra-soft, safe sponge for contact washing without scratching.

• Seamless Microfiber Towels (3 pcs)

  • Size: 40 × 40 cm

  • Weight: 400 g/m²

  • Ideal for drying, polishing, and working with chemicals without lint or streaks

Professional Workflow: How to Prepare a Vehicle for PPF Film Application

Step 1: Pre-Wash – Remove Loose Dirt

Apply a pH-neutral snow foam using a foam lance. Let it dwell for 5–7 minutes to loosen contaminants, then rinse thoroughly with high-pressure water.

Step 2: Contact Wash

Use the two-bucket method with a premium car shampoo and the included microfiber wash sponge. Clean all painted surfaces thoroughly. Rinse and dry using microfiber towels or a blower.

Step 3: Insect Removal

Apply MF-97 Insect Remover to bug-contaminated areas. Let it sit briefly (do not let dry), gently agitate if needed, then rinse.

Step 4: Chemical Decontamination

• Apply MF-75 Iron Remover to paint and wheels. Let it react for 3–5 minutes until it turns purple, then rinse thoroughly.

• Use MF-78 Mineral Remover to remove water spots and mineral buildup. Apply, gently wipe, and rinse.

Step 5: Mechanical Decontamination (Claying)

Use the MA-FRA Clay Bar with water or shampoo solution as lubrication. Glide over the paint until smooth, working panel by panel. Wipe clean with a microfiber towel.

Step 6: Final Degreasing

Spray MF-H0065 Decaflash onto a microfiber towel and directly onto the panel. Wipe in straight lines to ensure full removal of oils, waxes, and polish residues.

Step 7: Environment Setup

Ensure you're working in a clean, enclosed, dust-free space. Optimal conditions include:

• Temperature: 18–25 °C (65–77 °F)

• Low air movement and minimal humidity

• Proper overhead and side lighting

Step 8: PPF Film Installation

Choose the appropriate PPF Squeegee based on the surface shape (soft, medium, or hard). Use slip/tack solutions and apply film with smooth, even pressure. A heat gun or IR lamp may be used for stretching or sealing edges.

Conclusion

This all-in-one set is your ultimate solution for professional-grade paint preparation before PPF film application. With a well-balanced combination of decontaminants, tools, and microfiber accessories, it guarantees a perfectly clean, smooth, and residue-free surface—ensuring strong adhesion and long-lasting protection for any high-end vehicle.

Would you like this as a printable PDF, webshop product page text, or SEO-optimized blog article? Let me know how you plan to use it and I’ll format it for you!